ARRI ALEXA mini Camera driver for Windows 7 - ARRI ALEXA mini Camera driver from ARRI for OS In

ARRI ALEXA mini Camera 4.0.15.19417

ARRI ALEXA mini Camera driver from ARRI for OS Independent

ARRI ALEXA mini Camera driver from ARRI for OS Independent

Publisher review for ARRI ALEXA mini Camera 4.0.15.19417:

Before install ARRI ALEXA mini Camera 4.0.15.19417you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of ARRI ALEXA mini Camera . We recommend to always use most recent version of a driver.

We are proud to announce the release of the ALEXA MINI Software Update Package 4.0 for all ARRI ALEXA MINI cameras.

SUP 4.0 includes major improvements for ALEXA MINI and we strongly recommend installing this update at your earliest convenience.New features & changes overview: - 4:3 Recoding modes - enables use of the larger sensor area as well as 2x anamorphic de-squeeze for the monitoring paths
- Internal MXF/ARRIRAW 16:9 2.8K recording – ARRIRAW recording to CFast 2.0 cards
- Internal MXF/ARRIRAW Open Gate recording – Open Gate recording to CFast 2.0 cards
- Lens Data Archive and ECS improvements
- Super 16 HD recording mode – recording mode that crops a S16 sensor area and scales it to HD
- SDI Metadata – metadata embedded into the SDI signal
- Transvideo Starlite HD5-ARRI interface improvements – UI improvements including access to user buttons and playback control
- SDI enhancements in 3.2K and UHD recording
- Support for the CCP-1 – support for the camera control panel including daisy-chaining the MVF-1 viewfinder
- Wi-Fi toggle via user button – ability to toggle Wi-FI power via a user button to quickly enable and disable the Wi-Fi interface when the camera is used on a drone
- Switchable zoom position in the viewfinder – ability to select the position of the zoom area using the buttons surrounding the LCD panel on MVF-1
- Recordings with longer exposure times – the camera won’t restrict exposure times longer than 1/24 sec any more, but will display a warning
Please note: - SUP 4.0 contains updates for all components, including the viewfinder.
- The update may take significantly longer than prior updates.
- The viewfinder will switch off in the process and doesn’t give a visual feedback of the update all the time.
- Make sure not to power off the camera during firmware update.
Camera Update Procedure: - The SUP package will update the ALEXA camera as well as the Viewfinder (MVF-1) as long as the viewfinder is connected to the camera.
- After the download, please double click the downloaded file (.zip) in order to unpack it or unpack it manually. This will place two update files (.SUP and .lic) and the SUP release notes onto your computer.
- If not already done, prepare the USB stick for use with ALEXA by connecting it to the camera: please navigate to MENU>Media>Prepare USB medium & press CONFIRM. This will create the required folder structure on the USB stick.
- Connect the USB stick to your computer and place the downloaded .SUP file in the folder ARRI/AMIRA/SUP on the USB stick. Then place the downloaded .lic file in the folder ARRI/AMIRA/LICENSES on the USB stick.
- Make sure the camera is connected to a cable power source, or is powered with a full battery to avoid power loss during the update process.
- Connect the USB stick to the camera and navigate to MENU>System>Camera update.
- Select the SUP file from the list and press the jogwheel.
- In the following message, press CONFIRM to start the installation.
- Check the audio screen for the update progress.
- After the update process has finished, a success message is displayed on the monitor.
- For a downgrade to a previous SUP version, the license file of this previous version (amira_fw_update_aes_x.x.x.lic) needs to be available on the USB stick under \ARRI\AMIRA\LICENSES\.

Operating system:
OS Independent